KTM E-Cross The EBIKE
The BionX system works intuitively. The system supports you with electrical power which is proportional to the amount of effort you put into pedalling. Depending on the pedalling force of the rider, the system supplies more or less support. A torque sensor in the motor shaft analyses each and every turn of the pedal and calcu- lates the additionally required electrical power of the motor. Your strength and the support of the motor are in an ideal balance so that you can fully enjoy your ride.
The new, extremely light-weight hub motor does not only supply support, but at the same time works as a generator. When applying one of the two brake levers or using one of the four backcharging levels, the motor turns energy into electrical power and thus re- charges the battery while riding. Depending on the conditions of the terrain and a selective use of back charging, the range can be extended by up to 15%.
The increased motor voltage of 48V, the optimised electrotechno- logy, and the magnesium cover panels made it possible to increase effectiveness and therefore range as well as power delivery even more. The newly designed 9-fold premium threaded cogset puts smooth gear changes in practice.
The new 48V high-performance battery offers the best possible energy efficiency. Innovative Li-Mn cells ensure maximum use of range while offering a smaller size and increased capacity. De- pending on the eBike model, various batteries are employed with differing capacities and arrangement positions. The new battery charger is as small as a notebook adapter and can therefore easily be taken along on holiday trips, while it guarantees a fresh supply of power in a very short time.
The eCross is available in 4 different sizes: 46, 51, 56 and 60.
Let´s see how the KTM eRace is equipped:
|ALU Al6061||FORK||Suntour SF11 NCX-D MLO Sp:Air Spring, D:speedlock 63 mm|
|GEARS||Shimano Alivio 8/ Alivio 3||
|Shimano Deore LX T661|
|FRONT DERAILLEUR||Shimano Alivio||
|SunRace MFE608 11-32|
|CRANKSET||Shimano M410 48-38-28||
|PEDAL||Wellgo C128 Alu-MTB||
|Tektro Rotor 180/160|
|FRONT BRAKE||Tektro Auriga Comp Disc||REAR BREAK||Tektro Auriga Comp Disc|
|FRONT HUB||Shimano M525 6-L||REAR HUB||BIONX 48V (3,58 Kg)|
|RIMS/WHEELSET||Ambrosio Pulse Disk 700C||TYRES||Marathon Mondial 42-622|
|HEADSET||Ritchey OE Logic Zero Press-Fit||
|KTM Line AS-KT3|
|BAR||KTM Line JD-442A||GRIP||KTM VLG864-1AD3|
|SADDLE||KTM VL-3257/4213||SEAT POST||KTM Line SP-612M|
BIONX 250W HT25 -Display LCD -Battery: Motor 48V 52 Cells= 8,8Ah = 422 Wh. Fino a 130 KM
|USER INTERFACE||MOTORE: PL 250 HT SL (HIGH TORQUE/ SUPERLIGHT)|
|• LCD display with backlicht||• Rearhub motor (brushless DC motor)|
|• 4 assistance level 50/100/180/300%||• Torque sensor on the rearwheel axle|
|• 4 generator level||• Voltage level 48V|
|• Charge level indicator||• Nominal power 250W|
|• Actual speed||• Maximum power 600W|
|• Total kilometer||• Maximum torque 40Nm|
|• Trip kilometer|
|• Average speed|
|• Drive Time|
|• Actual assistance level|
|LEVEL||SUPPORT RATE||RIDING CONDITION||BACK-CHARGING LEVEL||RIDING CONDITION|
|1||50%||Riding on level terrain||1||Slight slope, following wind|
|2||100%||Hills, head wind||2||Slope, following wind|
|3||180%||Steep hills, strong head wind||3||Downhill|
|4||300%||Very steep roads||4||Steep downhill|
Technical data are subject to change without notice. Errors and omissions excepted.go back